4. Rotate the part -90 degrees, around the Coordinate 0,0

Result:
The Part has been rotated.

Next we will move the part into the positive X,Y quadrant.

1. Make sure the part is still selected, and click the Move icon on the modify toolbar.

2. We do not wish to make a copy, change layers, or rescale, so keep all 3 unchecked and
click OK. Choose End point from the Position list.

4. Select the endpoint at the lower left corner.

5. Select Coordinate from the list, and enter 0,0.

Result:
The endpoint we selected has been made the 0,0 point, and the part is now located in the positive quadrant.

If you want to move another face of your part into a machinable position, OneCNC provides an easy process to rotate the part in this manner, even if you do not know the needed angle of rotation.

1. Click on View > Back View

2. The face that we would like to machine is now displayed, but not in the proper position to
do so. Click the plane icon, and choose create plane from surface.

3. Select the surface facing us.

4. The plane has been positioned onto this surface.

6. Go to the Edit menu, choose placement and Move selection FROM plane (In car position)